Care & Maintenance
- Do Not: Use bathtub for 24 hours.
- Do Not: Leave soap, bottles or objects on the tub surface over night for 2 weeks.
- If you prefer to use a bathmat, use a bathmat without suction cups.
You may use ANY cleaner that is non-abrasive and bleach free:
Lysol Basin and Tile Cleaner (bleach-free).
Mr. Clean Or any other cleaner that is dispensed through a pump bottle or aerosol can.
DO NOT USE: ABBRASIVE CLEANERS SUCH AS AJAX OR COMET.
The bathtub surface may feel rough; this is nothing to be concerned about. This is an unavoidable part of the reglazing process (it is caused by dust in the air that has dried on the surface of the glaze, due to the fact that we are not glazing in a dust free environment).
The dust will dematerialized in 3 to 4 weeks with normal cleaning and usage leaving a glossy smooth finish.
Do Not pick at surface dust, this will damage the glaze !.
Dripping or running of the glaze will also smooth out in 3 to 4 weeks with normal cleaning.
If you must apply tape to glazed surfaces, use only Painter’s Tape.
(Failure to do so may result in damage to glazed surfaces)