Tile Reglazing/Refinishing

Why Reglaze Your Tile?

Refinishing your tile is the most economical and efficient way to revitalize your bathroom, at a mere fraction of the cost of replacement. Tile replacement involves not only the cost of new tile, but also replacing the walboard, floor and sub-floor, plus any hardware which might be damaged during the removal of the tile. This is very time consuming and expensive! Reglazing / refinishing will allow to realize spectacular savings, often as much as 90% over the cost of replacement!


Quickly Transform

Stained, chipped, and hard to keep clean tiles are unsightly ,unhealthy, and can create a negative impression to your guests. Re-Glazing / Refinishing your tile will give them a smooth, glossy finish within a matter of hours. This non-porous finish actually meets and exceeds the original manufacturer's specifications for stain and acid resistance.


How does it work?

The reglazing / refinishing process is a remarkable time tested method that was developed specifically for bathtub and tiled wall finishing. The secret lies in the ability of the compounds to fuse themselves into the original surface through a molecular bonding action. The new finish becomes a permanent part of the existing fixture, unlike bathtub liners, which can crack, trapping unsanitary water and creating a health hazard.


Tile Reglazing Process

  • Cover and protect all bathroom fixtures, floor, cabinets, etc.
  • Remove all old caulk between Bathtub and wall (we do not caulk over old caulk we start with a clean caulk line for a quality bond).
  • Remove all caulk from walls and corners.
  • Remove any loose or damaged grout.
  • Clean Bathtub and all other areas to be re-glazed (removes all built-up soap-scum, dirt, grime, caulk/silicone etc. from bathtub to insure a good bond).
  • Re-Grout wall tiles where needed.
  • Spray 2 coats of Cross-link Primer (this chemically bonds new glaze to bathtub) Cross-link primer has been field tested for over 15 years on tens of thousands of bathtubs.
  • Spray 3 coats of Synthetic Porcelain (white, bone or almond) Glaze will be dry in 15 minutes; bathtub can be used in 24 hours. Re-Caulk bathtub area, all walls and corners.
  • Clean and vacuum entire bathroom.
  • Bathroom can be used same day!.